[Ilugc] IPSEC Connection between Gateway Firewalls

~adarsh~ vpadarsh at gmail.com
Wed Jun 28 15:51:56 IST 2006


On 6/28/06, Binand Sethumadhavan <binand at gmail.com> wrote:
> On 28/06/06, ~adarsh~ <vpadarsh at gmail.com> wrote:
> > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> >     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> >     link/ether 00:03:99:88:ec:dc brd ff:ff:ff:ff:ff:ff
> > 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> >     link/ether 00:02:a5:b1:45:33 brd ff:ff:ff:ff:ff:ff
> > 4: sit0: <NOARP> mtu 1480 qdisc noop
> >     link/sit 0.0.0.0 brd 0.0.0.0
>
> There are no IPSec interfaces there; so what are your left/right
> subnets? Please post your config files as well. Also, post the output
> of "ip route show".

it says
217.66.217.128/28 dev eth1  scope link
192.168.1.0/24 via 217.66.217.142 dev eth1
152.109.247.0/24 dev eth0  scope link
127.0.0.0/8 dev lo  scope link
default via 217.66.217.142 dev eth1
and
195.229.190.151/28 dev eth1  scope link
152.109.247.0/24 via 195.229.190.151 dev eth1
192.168.1.0/24 dev eth0  scope link
127.0.0.0/8 dev lo  scope link
default via 195.229.190.151 dev eth1
>
> Binand
>


-- 
Adarsh


More information about the ilugc mailing list