[Ilugc] IPSEC Connection between Gateway Firewalls

~adarsh~ vpadarsh at gmail.com
Wed Jun 28 16:02:53 IST 2006


On 6/28/06, ~adarsh~ <vpadarsh at gmail.com> wrote:
> On 6/28/06, Binand Sethumadhavan <binand at gmail.com> wrote:
> > On 28/06/06, ~adarsh~ <vpadarsh at gmail.com> wrote:
> > > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> > >     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > > 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> > >     link/ether 00:03:99:88:ec:dc brd ff:ff:ff:ff:ff:ff
> > > 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> > >     link/ether 00:02:a5:b1:45:33 brd ff:ff:ff:ff:ff:ff
> > > 4: sit0: <NOARP> mtu 1480 qdisc noop
> > >     link/sit 0.0.0.0 brd 0.0.0.0
> >
> > There are no IPSec interfaces there; so what are your left/right
> > subnets? Please post your config files as well.
i configured it from the MNF GUI . What all config files i should place?
 Also, post the output
> > of "ip route show".
>
> it says
> 217.66.217.128/28 dev eth1  scope link
> 192.168.1.0/24 via 217.66.217.142 dev eth1
> 152.109.247.0/24 dev eth0  scope link
> 127.0.0.0/8 dev lo  scope link
> default via 217.66.217.142 dev eth1
> and
> 195.229.190.151/28 dev eth1  scope link
> 152.109.247.0/24 via 195.229.190.151 dev eth1
> 192.168.1.0/24 dev eth0  scope link
> 127.0.0.0/8 dev lo  scope link
> default via 195.229.190.151 dev eth1
> >
> > Binand
> >
>
>
> --
> Adarsh
>


-- 
Adarsh


More information about the ilugc mailing list