[Ilugc] IPSEC Connection between Gateway Firewalls

Binand Sethumadhavan binand at gmail.com
Wed Jun 28 16:30:29 IST 2006


On 28/06/06, ~adarsh~ <vpadarsh at gmail.com> wrote:
> On 6/28/06, Binand Sethumadhavan <binand at gmail.com> wrote:
> > On 28/06/06, ~adarsh~ <vpadarsh at gmail.com> wrote:
> > >  bit confused , i cant find the information , can u point it where its
> > > comming from
> >
> > If it is anyway similar to Redhat, you need to look inside your
> > /etc/sysconfig/network-scripts/ifcfg-eth1 and /etc/sysconfig/network.
> > Make sure the IPADDR variable is the local IP address, and the GATEWAY
> > variable is set to the default gateway IP address that your ISP
> > assigns you.
> >
> > Binand
> >
>
> here is the entries
>
> DEVICE=eth1
> USERCTL=no
> ONBOOT=yes
> BOOTPROTO=static
> IPADDR=195.229.190.151
> NETMASK=255.255.255.240
> NETWORK=195.229.190.144
> BROADCAST=195.229.190.159
> DHCP_CLIENT=/sbin/dhcpcd
> MII_NOT_SUPPORTED=yes
> NETWORKING=yes
> FORWARD_IPV4=yes
> HOSTNAME=firewalldxb.test.com
>
>
> DOMAINNAME=test.com
>
> # Gateway configuration
> GATEWAYDEV=eth1
> GATEWAY=195.229.190.145
>
>
> anything suspicious ?

Just that this GATEWAY is not visible in your routing table:

195.229.190.151/28 dev eth1  scope link
152.109.247.0/24 via 195.229.190.151 dev eth1
192.168.1.0/24 dev eth0  scope link
127.0.0.0/8 dev lo  scope link
default via 195.229.190.151 dev eth1

Get rid (comment out) of that GATEWAYDEV line, and restart your
network service. Then see if it changes your routing table in any way
(ip route show).

Binand


More information about the ilugc mailing list